Selasa, 13 November 2012

Cara Reset Printer HP Laserjet

HP Maintenance Code Reset Instructions PDF Print

HP LaserJet Maintenance Code Reset Instructions

HP Multi-Function LaserJet Maintenance Code Reset Instructions

HP Color LaserJet Maintenance Code Reset Instructions

Lexmark Laser Printer Maintenance Code Reset Instructions

HP LaserJet JetDirect Card Configuration Instructions

HP Monochrome LaserJet JetDirect Card Configuration Instructions

HP Color LaserJet Maintenance Code Reset Instructions

Home > HP Monochrome Laserjet Printers

HP LaserJet IIIsi Reset Instructions

  1. Press and hold MENU until Configuration Menu is displayed.
  2. Navigate through the menu to dislay Service Message=ON.
  3. Turn it "off" and press ENTER.
Home > HP Monochrome Laserjet Printers

HP LaserJet 4si and 5si Reset Instructions

  1. Press MENU until Config Menu is displayed.
  2. Press ITEM to dislay Service Message=OFF.
  3. Press ENTER.
  4. Press ONLINE.
NOTE: This messsage will only appear in the Configuration Menu if the PERFORM USER MAINTENANCE message appears.
Home > HP Monochrome Laserjet Printers

HP LaserJet 4000/4050 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 4100 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 4200/4300 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit.
  4. Release the SELECT button.
  5. Press Δ until you see New Maintenance Kit displayed.
  6. Press SELECT once to reset the maintenance count.
Home > HP Monochrome Laserjet Printers

HP LaserJet 4250/4240/4250 Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. When the machine powers up, the display is backlit, and the memory counter is displayed, press the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit, then release the button.
  4. Press Δ until you see New Maintenance Kit displayed.
  5. Press SELECT once to reset the maintenance count.
Home > HP Monochrome Laserjet Printers

HP LaserJet P4015/P4014/P4515 Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. When the machine powers up, the display is backlit, and the memory counter is displayed, press the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit, then release the button.
  4. Press Δ until you see New Maintenance Kit displayed.
  5. Press SELECT once to reset the maintenance count.
Home > HP Monochrome Laserjet Printers

HP LaserJet 5000 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 5100 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 8000 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 8100/8150 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the left side of the Item & Value buttons and turn on the printer.
  3. Continue to press the buttons until RESETTING MAINTENANCE COUNT is displayed.
  4. Release the buttons.
Home > HP Monochrome Laserjet Printers

HP LaserJet 9000 Code Reset Instructions

  1. Turn the printer off.
  2. Press down the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit.
  4. Release the SELECT button.
  5. Press Δ until you see New Maintenance Kit displayed.
  6. Press SELECT once to reset the maintenance count.
Home > HP Monochrome Laserjet Printers

HP LaserJet 9040/9050 Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. When the machine powers up, the display is backlit, and the memory counter is displayed, press the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit, then release the button.
  4. Press Δ until you see New Maintenance Kit displayed.
  5. Press SELECT once to reset the maintenance count.
Home > HP Multi-Function Laserjet Printers

HP LaserJet 4101MFP Code Reset Instructions

  1. Turn the printer off.
  2. Press down the SELECT button and turn on the printer.
  3. Continue to hold the SELECT button until the 3 LED lights blink then stay lit.
  4. Release the SELECT button.
  5. Press Δ until you see New Maintenance Kit displayed.
  6. Press SELECT once to reset the maintenance count.
Home > HP Multi-Function Laserjet Printers

HP LaserJet 4345 MFP Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. Once the printer starts counting the installed memory press and hold the 6.
  3. Continue to hold the 6 button until the 3 LED lights blink then stay lit, then release the button.
  4. Press 3 and then 6 again to select New Maintenance Kit. The printer will re-initialize and the maintenance count will be reset.
Home > HP Multi-Function Laserjet Printers

HP Color LaserJet 4730 MFP Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. Once the printer starts counting the installed memory press and hold the 6.
  3. Continue to hold the 6 button until the 3 LED lights blink then stay lit, then release the button.
  4. Press 3 and then 6 again to select New Maintenance Kit. The printer will re-initialize and the maintenance count will be reset.
Home > HP Multi-Function Laserjet Printers

HP LaserJet 9040/9050 MFP Code Reset Instructions

  1. Turn the printer off and turn it back on.
  2. Once the printer starts counting the installed memory press and hold the 6.
  3. Continue to hold the 6 button until the 3 LED lights blink then stay lit, then release the button.
  4. Press 3 and then 6 again to select New Maintenance Kit. The printer will re-initialize and the maintenance count will be reset.
Home > HP Color Laserjet Printers

HP Color LaserJet 4600/4650 Maintenance Code Reset Instructions

  1. Press the ∇ button until the display reads "CONFIGURE DEVICE" and press √.
  2. Press the ∇ button until the display reads "RESETS" and press √.
  3. Press the ∇ button until the display reads "RESET SUPPLIES" and press √.
  4. Press the ∇ button until the display reads "FUSER" and press √.
Home > HP Color Laserjet Printers

HP Color LaserJet 4700/CP4005 Maintenance Code Reset Instructions

  1. Press the ∇ button until the display reads "CONFIGURE DEVICE" and press √.
  2. Press the ∇ button until the display reads "RESETS" and press √.
  3. Press the ∇ button until the display reads "RESET SUPPLIES" and press √.
  4. Press the ∇ button until the display reads "FUSER" and press √.
Home > HP Color Laserjet Printers

HP Color LaserJet 5500/5550 Maintenance Code Reset Instructions

  1. Press the ∇ button until the display reads "CONFIGURE DEVICE" and press √.
  2. Press the ∇ button until the display reads "RESETS" and press √.
  3. Press the ∇ button until the display reads "RESET SUPPLIES" and press √.
  4. Press the ∇ button until the display reads "FUSER" and press √.
Home > Lexmark Printer Resets

Lexmark Optra S Reset Instructions

  1. Press and hold the GO and RETURN buttons and power on the printer until Performing Self Test appears in the display.
  2. Release the buttons to access the Diagnostics Menu - the printer may display 80 Scheduled Maintenance message.
  3. Press the GO Button to enter Diagnostic Mode.
  4. Using the arrow keys, scroll to Printer Setup menu and press SELECT.
  5. Use the arrow keys to get to the Reset Maintenance Count
    NOTE: Maintenance Count Value only allows you to view the page count.
  6. To exit Diagnostics Mode, simply cycle the power.
Home

HP Color LaserJet Transfer Kit Code Reset Instructions

  1. Press the ∇ button until the display reads "CONFIGURE DEVICE" and press √.
  2. Press the ∇ button until the display reads "RESETS" and press √.
  3. Press the ∇ button until the display reads "RESET SUPPLIES" and press √.
  4. Press the ∇ button until the display reads "TRANSFER KIT" and press √.
    5. The transfer kit reset is complete.
Home > JetDirect Configuration

HP LaserJet 2300, 2400, 4200, 4250, 4300, 4350, 9000, 9050 and Color LaserJet 4600, 4650, 5500, 5550 & 9500 printers

  1. Print out a configuration page before undertaking this procedure. Retain the EIO/Network/JetDirect Configuration Page (usually the 2nd page). This page contains the settings you will need to enter to complete this procedure. If you are unable to print a configuration page, consult with your network administrator to obtain these settings before proceeding.
  2. Turn the printer off. Install the new JetDirect card and connect the network cable.
  3. Turn the power on and wait for the printer to reach the READY or ONLINE state.
  4. Press √.
  5. Press Δ or ∇ to scroll to CONFIGURE DEVICE. Press √.
  6. Press Δ or ∇ to scroll to I/O. Press √.
  7. Press Δ or ∇ to scroll to EIO 1, 2, OR 3 (if installed) or EMBEDDED JETDIRECT. Press √.
  8. Press Δ or ∇ to scroll to TCP/IP. Press √.
  9. Press Δ or ∇ to scroll to CONFIG METHOD. Press √.
  10. Press Δ or ∇ to scroll to MANUAL. Press √.
  11. Press Δ or ∇ to scroll to MANUAL SETTINGS. Press √.
  12. Press Δ or ∇ to scroll to IP ADDRESS. Press √.
  13. Enter the first octet of the IP address using the Δ and ∇ buttons. On LaserJets 9000/9050/9500 you may use the numerical keypad to enter these values.
  14. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  15. Press Δ or ∇ to scroll to SUBNET MASK. Press √.
  16. Enter the first octet of the subnet mask using the Δ and ∇ buttons.
  17. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  18. Press Δ or ∇ to scroll to DEFAULT GATEWAY. Press √.
  19. Enter the first octet of the default gateway using the Δ and ∇ buttons.
  20. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  21. If required, Δ or ∇ to scroll to and configure SYSLOG SERVER and IDLE TIMEOUT using the same method.
  22. Once you have completed the configuration, press < to return to the main menu.
Home > JetDirect Configuration

Color LaserJet 4600, 4650, 5500, 5550 & 9500 printers

  1. Print out a configuration page before undertaking this procedure. Retain the EIO/Network/JetDirect Configuration Page (usually the 2nd page). This page contains the settings you will need to enter to complete this procedure. If you are unable to print a configuration page, consult with your network administrator to obtain these settings before proceeding.
  2. Turn the printer off. Install the new JetDirect card and connect the network cable.
  3. Turn the power on and wait for the printer to reach the READY or ONLINE state.
  4. Press √.
  5. Press Δ or ∇ to scroll to CONFIGURE DEVICE. Press √.
  6. Press Δ or ∇ to scroll to I/O. Press √.
  7. Press Δ or ∇ to scroll to EIO 1, 2, OR 3 (if installed) or EMBEDDED JETDIRECT. Press √.
  8. Press Δ or ∇ to scroll to TCP/IP. Press √.
  9. Press Δ or ∇ to scroll to CONFIG METHOD. Press √.
  10. Press Δ or ∇ to scroll to MANUAL. Press √.
  11. Press Δ or ∇ to scroll to MANUAL SETTINGS. Press √.
  12. Press Δ or ∇ to scroll to IP ADDRESS. Press √.
  13. Enter the first octet of the IP address using the Δ and ∇ buttons. On LaserJets 9000/9050/9500 you may use the numerical keypad to enter these values.
  14. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  15. Press Δ or ∇ to scroll to SUBNET MASK. Press √.
  16. Enter the first octet of the subnet mask using the Δ and ∇ buttons.
  17. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  18. Press Δ or ∇ to scroll to DEFAULT GATEWAY. Press √.
  19. Enter the first octet of the default gateway using the Δ and ∇ buttons.
  20. Press √. Repeat the previous two steps to enter the second, third, and fourth octets.
  21. If required, Δ or ∇ to scroll to and configure SYSLOG SERVER and IDLE TIMEOUT using the same method.
  22. Once you have completed the configuration, press < to return to the main menu.
Diposting oleh di

2 komentar:

Langganan: Posting Komentar (Atom)